MIKE-9 Upper
Designed & Manufactured in the USA · Boise, ID
Frequently bought together
-
9mm Recoil Mitigation Buffer Kit Original price was: $89.00.$66.75Current price is: $66.75.+ Add
Overview
The Foxtrot Mike Products MIKE-9 complete 9mm upper receiver is built from the ground up to provide outstanding reliability and accuracy with a host of top-tier features. Its monolithic style comes from a proprietary interlock between the upper and handguard.
The MIKE-9 upper comes fully assembled and ready to drop on any pistol caliber lower receiver that uses Glock magazines. It is sleek and lightweight, with a simple, reliable and easy-to-maintain direct blowback operating system packaged in a monolithic-style billet upper receiver. Designed with several patented features, it is one of the most innovative Glock-style 9mm AR-15 uppers on the market.
With its full-length Picatinny top rail and M-LOK compatible handguard, the MIKE-9 upper offers plenty of mounting space for optics and other accessories.
The slim-line Pic-Rail Delete handguard is M-LOK compatible with your favorite accessories.
With forward charging, the traditional M4 charging handle is replaced with an ambidextrous, non-reciprocating 4-position forward charging handle. Its ergonomic design makes the forward charging MIKE-9 an excellent choice for both tactical and recreational shooting.
The 7" barrel comes with a Micro Blast Diffuser.
The 16″ barrel comes with a 4-port compensator.
This configuration: 7" barrel · Standard · Rear Charge.
- 41V50 match-grade barrel, vacuum stress relieved, 1:10 twist, threaded 1/2×28.
- 9mm heavy bolt (pre-hard 4342, vacuum heat treated, Melonite) with S7 firing pin and extractor.
- M-LOK handguard, Standard or Pic-Rail Delete.
Specifications
| Platform | |
|---|---|
| Caliber | 9mm |
| Platform | MIKE-9 |
| Operating System | Straight Blowback |
| Barrel and muzzle | |
| Barrel | 7" |
| Twist | 1:10 |
| Barrel Material | 41V50 match grade, melonite, honed chamber |
| Muzzle Thread | 1/2x28 |
| Receivers | |
| Upper Receiver | Billet Aircraft Aluminum Type III Hard Black Anodizing |
| Handguard | Standard |
| Charging Handle | Rear Charge |
| Bolt | 9mm Heavy Bolt Machined From Pre-hard 4342, Machined Then Post Vacuum Heat Treated To Increase Hardness, Then Coated In Melonite |
| Compliance | |
| FFL required | No |
Notes
Barrels under 16″: this complete upper receiver assembly is subject to all NFA rules and regulations. Be advised: if you are using a stripped FM lower or a non-FM lower and your FM upper has a short-stroke notch under the bolt, use a buffer 3.75″ or longer (or a 1/2″ spacer with a standard-length heavy buffer) so the hammer does not catch on the notch. All 9mm blowback PCCs need a heavy buffer to run reliably.
Lifetime warranty on all Foxtrot Mike Products.