9mm RMB + Premium Recoil Spring
Designed & Manufactured in the USA · Boise, ID
In stock
Frequently bought together
-
A5 Buffer Tube $29.00+ Add
-
PCC Buffer Retainer $5.00+ Add
-
PCC Firing Pin Spring $1.00+ Add
-
9mm BCG Reliability Kit $30.00+ Add
Fits MIKE-9 and VFM-9 · A5 unless short-stroke
Unless your upper is short-stroke, the RMB will not work properly without an A5 buffer tube, which it needs for proper last-round bolt hold-open (LRBHO) and FRT or super safety function.
Overview
This 9mm Recoil Mitigation Buffer (RMB) comes with a premium recoil spring and is designed for use with super safeties and suppressors.
Specifications
| Fits | MIKE-9 and VFM-9 · A5 unless short-stroke |
|---|---|
| Contents | 9mm RMB · premium recoil spring |
| Buffer Weight | 9.5 oz |
| FFL required | No |
RMB buffer
Rearward stroke
At the end of the rearward stroke, the RMB's internal spring compresses and the sliding buffer body comes to rest against a high-durometer urethane impact modifier. That slows the moving mass over a longer stop than a solid heavy buffer, so the recoil impulse is softer.
Return to battery
As the recoil spring drives the bolt forward into the barrel, the internal spring and urethane soften the second impact. The internal reciprocating mass keeps moving forward at the same time, which helps keep the bolt seated instead of bouncing.
Testing
In FM high-speed video testing with a 5″ VFM-9 upper, observable bolt bounce was eliminated. In FM blind testing, every participating tester reported less felt recoil than with a standard heavy buffer.
Notes
RMB test limits: FM testing used a 5″ VFM-9 upper with no +P or +P+ ammunition. The most recoil reduction came from shorter barrels; other barrel lengths, ammunition, bolt weights, recoil springs and buffer tubes may give different results. Results vary, and the RMB does not replace checking that the complete firearm runs safely and reliably. Use an A5 buffer tube unless the upper is short-stroke: the A5 is required for last-round lock-back and FRT / super-safety function on non-short-stroke uppers. Buffer tube not included. Check fit with your upper, bolt, buffer tube and recoil spring before use.
Unless your upper is short-stroke, the RMB will not work properly without an A5 buffer tube, which it needs for proper last-round bolt hold-open (LRBHO) and FRT or super safety function.